Screen Cleaning Zestron SD 100
Model No: SD100
Boiling range 150-178 °C
pH-value (10g/l H2O) Neutral
Cleaning temperature Room Temperature
Vapor pressure 4.6 (mbar) at 20°C
TDS:  Download

ZESTRON® SD 100 is a solvent-based cleaning agent used to remove solder paste from SMT stencils in spray-in-air equipment. Misprinted assemblies can also be cleaned with ZESTRON® SD 100.

 Product Enquiry

Free-of-charge cleaning trials can be performed at one of ZESTRON's Global Technical Centers. ZESTRON's European, North American and Asian Technical Centers feature spray-in-air, ultrasonic or spray-under-immersion processes. This provides an extensive overview on all available processes by leading international equipment manufacturers.

Upon completion of the cleaning trials, extensive analytical tests such as SIR and ionic residue measurements can be performed.

Advantages compared to other cleaners:

  • High  bath  loading  capability,  very  good  filterability  and  therefore  a  long  bath  life  as well as low maintenance costs.
  • This cleaner facilitates short process times due to very good drying characteristics.
  • With a flash point of 42°C (108°F), ZESTRON® SD 100 can be used in non-heated cleaning equipment without explosion protection.
  • ZESTRON® SD 100 can also be used for stencil underside wipe cleaning in printers.
  • ZESTRON® SD 100 is based on non-halogen, organic solvents.
  • Used at ambient temperature.
  • This medium is also applicable for manual cleaning.
  • Low odor.

 

Specification:

Technical Data

Density

(g/ccm) at 20°C/68°C

0.76

Surface tension

(mN/m) at 25°C/77°F

21.7

Boiling range

°C/°F

150-178 / 302-352

Flash point

°C/°F

42 / 108

pH-Value

10g/l H2O

Neutral

Vapor pressure

(mbar) at 20°C/68°F

4.6

Solubility in water

 

Partially Soluble

Cleaning temperature

°C/°F

Room Temperature

Application concentration

Ready to use

Pure

HMIS Rating

Health-Flammability-Reactivity

1 – 2 – 0