SM-30 nozzle cleaning machine adopts multi-nozzle jet cleaning method, uses hydro-mechanics to break water to produce extremely.
Cleaning: The machine is fully automatic cleaning, which can clean 30 nozzles each time. Different types of nozzles are equipped with different fixture trays. Any type of Mounter nozzles can be cleaned. After cleaning, it will be automatically dried by compressed air. Inspection: Take out the fixture tray and put it on a special nozzle inspection device for inspection. The true cleanliness of the nozzle after cleaning SM-30 Nozzle cleaning machine can be observed.
High pressure jet technology
The fine water mist particles are continuously pressurized to break up the water and produce a large number of 3-10um water mist particles, so that it can clean the dirt on the inner wall of the nozzle with a small aperture.
Impulse power
A powerful impulse power is formed at the speed of sound (V=360m/s) and sprayed onto the nozzle to be cleaned. The pulse frequency can reach 30 times per second. A continuous impact force is formed above the nozzle to be cleaned to crush the dirt on the surface and inside of the nozzle. So as to achieve the purpose of cleaning.
Main Technical Parameters
Item
SM-30
Specification/Parameters
Dimension
L x W x H
400x500x530 (mm)
Weight
Machine Weight
About 35 Kg
Cleaning Fluid
Type of cleaning fluid
Industrial pure water
Consumption
≤400ML/H
Fluid used
Air source
Compressed air
Operating Pressure Range
0.5-0.65Mpa (when Cleaning)
Spray Pressure
≤0.4Mpa
Air Consumption
Below 500ML/min
Power supply
Voltage
AC220V 50HZ
Total Power
100W
Nozzle
Specification
30 PCS
Features