Heraeus – Lead Containing Solder Paste
  Heraeus – Lead Free Solder Pastes
  Heraeus – SMT Adhesive-Dispensing
  Heraeus – SMT Adhesive-Printing
  Zestron – Cleaning Chemicals
  Zestron – Bath Control Systems
  Humiseal – Conformal Coatings
  KIC – Thermal Profiler
  KHJ – Splice Tapes, Clips and Tools
  KHJ – Underside Cleaning Rolls, Wipes
  IDENTCO - Labels for Life
  Metcal – Hand Soldering, Rework & fume                   extraction Systems
  Monarch - Soldering Station
  Sudong – Electric Screwdriver
  Bosung – Nozzles & Nozzle cleaning Machines
  Techcon – Dispensing Robot, Controller &                      consumable
  Tronex-Cutters & Pliers
  Circuitmedic – Repair Kits for Circuit Boards
  ESD – Anti static & General products
  BGA Rework Station
  Pick & Place Machine
  Pick & Place Machine Table Top
  Reflow Oven
  Profiling Equipments
  Pcb/Stencil Cleaning Machines
  Wave Soldering Machine
  Solder Dross Recovery System
  Spray Fluxer
  Automatic Optical Inspection
  Flexia Bga Inspection System
  X-Ray Inspection
  Screw Driving Robots
  Dry Cabinets
  SMD Smart Counter
  More Equipments
  General Consumbales
      Home - Products - Sonotek Spray Fluxer
     SelectaFlux In Line FLuxing System
The SelectaFlux In-line fluxing system is a programmable three-axis small footprint platform designed to selectively flux circuit board assemblies. It helps bring quality, consistency, and reliability to your flux coating process while improving transfer efficiencies (up to 99%). Coverage areas are limited to a desired pre-programmed region. This eliminates the masking, demasking, and rework evident in most other application methods.The SelectaFlux In-line system can be configured for a conveyorized process or outfitted with an adjustable fixture for a manually fed batch application.

The SelectaFlux In-line system has many benefits and integrated features:

Benefits :
  • Reduced wasteful overspray and atmospheric contamination
  • Minimal servicing and downtime
  • Self-cleaning ultrasonic nozzle prevents clogging
  • Controlled velocity delivery will not harm or disturb components
  • Compatible with ALL fluxes
  • Small footprint platform minimizes floor space required
  • Windows®-based programming software
  • Offline programming capabilities
  • Front panel LCD screen with function keys
  • 500 mm x 500 mm x 100 mm (19.69” x19.69” x 3.94”) range of motion
  • Three axes of continuous motion (programmable three-axis coordinated motion) via stepper motor drive
  • Non volatile memory for storage of up to 30 programs
  • Can be configured for spray up or spray down applications
  • Spray pattern adjustable from 2 mm - 38 mm (0.080” - 1.50”)
  • Wide range of delivery rates from .02 ml/min and up
  • Also ideal for tinning and odd-shaped components
Operating Principl :
The SelectaFlux In-line fluxing system is a complete, ready to operate selective fluxing system. It combines Sono-Tek’s unique Microspray ultrasonic atomizing nozzle with low-pressure air to produce a soft, highly focused beam of spray. A separate control module handles input/output system functions.
Compressed air, typically at 1 psi, is introduced into the diffusion chamber of the air shroud,which produces a uniformly distributed flow of air around the nozzle stem.
The ultrasonically produced spray at the tip of the stem is immediately entrained in the air stream.An adjustable focusing mechanism on the air shroud allows complete control of spray width.
The spray envelope is bow-shaped. The width of the bow is controlled by moving the focus-adjust mechanism in and out. The distance between nozzle and substrate can be varied from near-contact to approximately two inches.
SelectaFlux In-Line Fluxing System Specifications
Ultrasonic Nozzle Specifications :
Weight : 200 g (7 oz.)
Materials :
 Nozzle Body:* Titanium alloy 6AI-4V
 Nozzle Housing: 316 stainless steel
 O-rings Kalrez®
 Air Shroud: Delrin®/316 stainless steel
 Liquid Inlet* (1/8" or 1/16" tubing): 316 stainless steel
 Air Inlet (1/4" tubing): 316 stainless steel
Operating Temperature : 20 - 150° C
Air Pressure : 0-14 kPa (0 - 2 psi)
Spray Pattern Diameter : 2 mm - 13 mm (0.080" - 0.5")
* Wetted Materials: Teflon®, Kalrez® and Delrin® are registered trademarks of E.I. DuPont de Nemours and Company :: Specifications may change without notice
Liquid Delivery Specifications :
 1 liter pressure tank with manual pressure adjust for flowrate
Alarm Output : Relay, N/O, N/C, attaches to users alarm device
Error Output : Sounds alarm in the event of nozzle malfunction
SelectaFluc Unit Specifications :
Alarm Output for Nozzle Malfunction : 670 mm / sec (26.4 in / sec)
Input Voltage range : 8.2 kg (18 lbs.)
Standard Work Area (XYZ) : 500 mm x 500 mm x 100 mm (19.68 in x 19.86 in x 3.94 in)
Repeatability : ± 0.04 mm (0.0016 in)
Positional Resolution   ± 0.02 mm (0.0008 in)
Power Requirements   120V, 200V, ±10%/50-60 Hz
Air Supply Requirements   80 PSI dry unlubricated air
Conveyor Speed   Programmable up to 24.38 m/min (80 ft/min)
Conveyor Capability   SMEMA
Conveyor Process Flow   Programmable right to left or left to right
Floor Space   40" x 54"
Conveyor Edge Clearance   SMEMA standard 0.185"
Belt Conveyor Weight Limit   5 kg (11 lbs.)
Chain Conveyor Weight Limit   15 kg (33 lbs.)
Certification   CE certified
  Home | About Us | Consumables | Equipments | Partners | News | Special Promotions | Careers | Photogallery | SiteMap
  Copyright 2013. All Rights Reserved. Web Presence by CFCS
Sonotek Spray Fluxer | Ultrasonic nozzle systems | SonoFlux 2000F | SonoFlux EZ | SonoFlux Servo | SelectaFlux | SelectaFlux OEM | SelectaFlux Retrofit | SelectaFlux Inline | Thin film coatings | Printed circuit Board fluxing | Medical nanocoatings | implantable device coatings onto stents | Caltheters | Balloons and pacemakers | Fuel cell PEMs | Thin film solar cells | Phosphoric doping | Anti reflection coatings | CIGs | Float glass coatings | Pan release coatings for commercial baking | Spray drying | Carbon nanotube suspensions | Ultrasonic nozzle systems supplier | SonoFlux India