Heraeus – Lead Containing Solder Paste
  Heraeus – Lead Free Solder Pastes
  Heraeus – SMT Adhesive-Dispensing
  Heraeus – SMT Adhesive-Printing
  Zestron – Cleaning Chemicals
  Zestron – Bath Control Systems
  Humiseal – Conformal Coatings
  KIC – Thermal Profiler
  KHJ – Splice Tapes, Clips and Tools
  KHJ – Underside Cleaning Rolls, Wipes
  IDENTCO - Labels for Life
  Metcal – Hand Soldering, Rework & fume                   extraction Systems
  Monarch - Soldering Station
  Sudong – Electric Screwdriver
  Bosung – Nozzles & Nozzle cleaning Machines
  Techcon – Dispensing Robot, Controller &                      consumable
  Tronex-Cutters & Pliers
  Circuitmedic – Repair Kits for Circuit Boards
  ESD – Anti static & General products
  BGA Rework Station
  Pick & Place Machine
  Pick & Place Machine Table Top
  Reflow Oven
  Profiling Equipments
  Pcb/Stencil Cleaning Machines
  Wave Soldering Machine
  Solder Dross Recovery System
  Spray Fluxer
  Automatic Optical Inspection
  Flexia Bga Inspection System
  X-Ray Inspection
  Screw Driving Robots
  Dry Cabinets
  SMD Smart Counter
  More Equipments
  General Consumbales
     Home - Products - Sonotek Spray Fluxer
     SonoFlux EZ
Ultrasonic Reciprocating Spray Fluxing System
The SonoFlux EZ is an economical ultrasonic spray fluxing system designed on a reciprocating platform. The ultrasonic atomization module uses a high impact flux transfer system for maximizing top-side fills
The SonoFlux EZ system has many integrated features:
  • Economical reciprocating fluxer
  • Easy integration and operation with all wave solder machines
  • Non-clogging ultrasonic atomizing nozzle
  • High velocity flux transfer for maximum top-side fill
  • Low maintenance design reciprocator
  • Uniform coverage
  • Reduction in flux consumption up to 80%
  • Compatibility with all fluxes
(Rosin, no-clean, VOC-free)
Operating Principl :
The SonoFlux EZ system can either be installed internally in your wave solder machine or is available as a stand-alone unit.
The system is also equipped with a high impact flux transfer system to help with PCBs that have difficulty with top-side fill, such as those with thick back planes, tight lead-to-hole ratios, or contaminated components.
INDUSTRY PROVEN - Sono-Tek spray fluxing systems with an non-clogging ultrasonic nozzle and spray dispensing mechanism have been proven in thousands of industrial PCB fluxing applications worldwide.
FLUX APPLICATION - Flux is supplied from a closed pressure reservoir to the ultrasonic nozzle. The flux reservoir includes a level sensor to alert the operator to a low level flux condition. The flux is atomized into a fine mist at the tip of the non-clogging, large-orifice ultrasonic nozzle which is reciprocated below the PCB, directing flux upward.
FASTEST PAYBACK - In many installations, Sono-Tek systems have a reduced flux consumption by up to 80% as well as reducing solder defects by a similar percentage. Compared to foam fluxing, additional savings are achieved by the elimination of thinner and titration checks, as well as reduced waste disposal costs. Sono-Tex systems have also been shown to reduce flux consumption by up to 50% when compared to conventional spray fluxers.
SERVICE AND SUPPORT - Sono-tek Corporation prides itself on offering technical support second to none. North American-based service personnel and international distributors with factory-trained technicians provide this high standard of service throughout the world.
SonoFlux EZ System Specifications
General Specifications :
Fluxer Type : Reciprocating ultrasonic nozzle with high impact flux transfer system
Construction : Stainless steel, titanium, Teflon®, polypropylene, Delrin®, Ertalyte® (flux wetted materials)
Storage Capability : 49 Recipes
Display : 2 x 40 backlit character LCD
Flux Types : RMA, RA, Alcohol-based low solids, VOC-free
PCB Width Range : 2–18 inches (50-457 mm)
Flux Deposition Range : 300-2500 µg/in2 (for typical no-clean fluxes)
Deposition Uniformity : ±10%
Deposition Repeatability : ± 5%
Reciprocator speed : 0 - 700 mm/sec
Conveyor Speed Range : 0 - 250 cm/min (0 - 8.2 ft/min)
Teflon®, Kalrez®, and Delrin® are registered trademarks of E.I. DuPont de Nemours and Company Specifications may change without notince.
Service Requirements :
Line Power : 110/120 VAC, 50/60 Hz or 220/240 VAC, 50/60 Hz Single phase, 900 VA max
Compressed Air : Clean, dry and oil-free
Supply Pressure : 50 - 100 psi
Capacity : 6 cfm
Exhaust : 300 cfm minimum, 600 cfm recommended
  Home | About Us | Consumables | Equipments | Partners | News | Special Promotions | Careers | Photogallery | SiteMap
  Copyright 2013. All Rights Reserved. Web Presence by CFCS
Sonotek Spray Fluxer | Ultrasonic nozzle systems | SonoFlux 2000F | SonoFlux EZ | SonoFlux Servo | SelectaFlux | SelectaFlux OEM | SelectaFlux Retrofit | SelectaFlux Inline | Thin film coatings | Printed circuit Board fluxing | Medical nanocoatings | implantable device coatings onto stents | Caltheters | Balloons and pacemakers | Fuel cell PEMs | Thin film solar cells | Phosphoric doping | Anti reflection coatings | CIGs | Float glass coatings | Pan release coatings for commercial baking | Spray drying | Carbon nanotube suspensions | Ultrasonic nozzle systems supplier | SonoFlux India