CONSUMABLES
  Heraeus – Lead Containing Solder Paste
  Heraeus – Lead Free Solder Pastes
  Heraeus – SMT Adhesive-Dispensing
  Heraeus – SMT Adhesive-Printing
  Zestron – Cleaning Chemicals
  Zestron – Bath Control Systems
  Humiseal – Conformal Coatings
  KIC – Thermal Profiler
  KHJ – Splice Tapes, Clips and Tools
  KHJ – Underside Cleaning Rolls, Wipes
  Metcal – Hand Soldering, Rework & fume                   extraction Systems
  Monarch - Soldering Station
  Sudong – Electric Screwdriver
  Bosung – Nozzles & Nozzle cleaning Machines
  Techcon – Dispensing Robot, Controller &                      consumable
  Circuitmedic – Repair Kits for Circuit Boards
  ESD – Anti static & General products
   
  EQUIPMENTS
  BGA Rework Station
  Pick & Place Machine
  Pick & Place Machine Table Top
  Reflow Oven
  Profiling Equipments
  Pcb/Stencil Cleaning Machines
  Wave Soldering Machine
  Solder Dross Recovery System
  Spray Fluxer
  Automatic Optical Inspection
  Flexia Bga Inspection System
  X-Ray Inspection
  Screw Driving Robots
  Dry Cabinets
  SMD Smart Counter
  More Equipments
  General Consumbales
   
      Home - Products - EPS - Miniwave Rework
    ESS 300 Selective Soldering Machine
 
 
The Selective Soldering Machine- ESS is the completely automated "in-line" version handling boards up to 18" x 24". It has a SMEMA pass through conveyor that features automatic conveyor width adjustment and a "crowder" to facilitate positive location of the board. The board is maintained stationary during the soldering process preventing components from toppling over causing "unset" inter-metallic fillets. The ESS couples high throughput with precise process controls. The programmable features provide the tools to set all process parameters, including immersion depths, pre-heat dwells, travel distances and speeds, solder temperature and wave height. Once set, the system will repeat precisely.
The ESS will out-produce 6 or more operators soldering with an iron while significantly increasing the solder joint quality and to a predictable schedule.
 
Technical parameters - ESS 300
Max. PCB Size 310 x 310mm (12" x 12")
Max. Clearance on Solder Side* 25mm (1")*
MAX. Transport Speed 6m/min
Transport Angle 0°fixed
Position accuracy above fluxer, preheater, and solder nozzle ± 0.1mm (± 0.004")
Flux Tank 2L Stainless Steel & Fittings, including Flux Level Montioring
Flux Speed Max. 6m/min
Spray Width (Nozzle diameter 0.3mm) 3mm - 6mm (0.12" - 0.24")
100% IR Preheat 900W
Nozzles Wettable, Special
Smallest Nozzle Diameter 4.0mm on Wettable Nozzles
Min. Neighbor Component Clearance* 1.5 - 3mm (0.06" - 0.12") depending on nozzle type*
Solder Capacity Approx. 15kg (33 lbs.)
Max. Temperature 400°C (725°F)
Warm-up Time Approx. 45 minutes
(N 2 Supply) (bottles, tank, or generator suitable, supplied by user) N 2 -covering over solder bath & pump unit
N 2 Pressure 2 bar (30 psi)
N 2 Consumption 0.8 to 1.7 CFM(23-49 liters/min) depending on nozzle shroud
Pressure 5.5 bar (80 psi)
Power 3 x 230/400V, N, PE, 50/60 Hz
Max. Power Consumption 2.5kW
Max. Fuse Rate 3 x 16A
Exhaust Power (supplied by customer) 150 m 3 /hour
Exhaust Duct 100mm (4") india.
Dimensions
Size Dimensions 1240mm L x 1050mm W x 1400mm H (48.8" x 41.3" x 55.1")
Weight 150kg (330 lbs.)
 
 
 
 
  Home | About Us | Consumables | Equipments | Partners | News | Special Promotions | Careers | Photogallery | SiteMap
  Copyright 2013. All Rights Reserved. Web Presence by CFCS
 
EPS Wave Soldering Reflow Machines | Wave Soldering Machine | Lead or Lead-Free solder | Single or dual wave soldering | WSM 180 Wave Soldering Machines | WSM 300 Single and Dual Wave Soldering Machines | Miniwave Soldering System | Miniclean | Reflow Ovens | Floor Mounted Reflow Ovens | Table Top Reflow Ovens | Conformal Coating | Selectcoat-450 | Wave Soldering Reflow Machines manufacturers | Lead or Lead-Free solder dealer | Single or dual wave soldering supplier | WSM 180 Wave Soldering Machines supplies | WSM 300 Single and Dual Machines